GOPHERSPACE.DE - P H O X Y
gophering on sdf.org
UKNC issues
===========

My  UKNC  is a  great  computer.  A  PDP-11  with 4  (albeit  emulated)
floppies,the serial port  is nice even if  it has only 64  kB of RAM.

My problem is the screen. At home I have only one compatible device: an
old LCD  TV. It is  not a bad  device at all: it  has some 12"  (or so)
screen (I think it is 1024x768) and  a lot of inputs (an antenna input,
a SCART, a VGA and the audio-video-sync inputs, and a YUV thing, too).

My Apple  II can  use the antenna  input (with a  RF modulator)  or the
video  input (without  use  of  sync and  audio  ones). My  Elektronika
Bk-0010.1 can use the SCART. The  UKNC has an adapter with two options:
the video-sync-audio combination and a 3-cable RGB output. So I use the
video only (using sync makes no difference  and the audio is of no use:
except it causes the TV's speakers  to make noise). The problem is that
I cannot see  complete image from the UKNC. First  two or three columns
are off the screen (and presumably some last ones, too). The problem is
that the  TV has not  image adjustment  functionality at all.  There is
something for the TV input put not for the video.

So I  decided to try  the SGI  O2 it has  an analog video  input (among
others). But something is wrong here.  I am usually able to capture the
initial picture  from the device  (usually deformed or  incomplete) and
the  "Live Input"  freezes. I  have had  the same  problem when  I have
connected the  Apple II. But  (if I'm not  mistaken) it sort  of worked
with the Playstation  2 some time ago.  So I am not sure  what is wrong
here.

I  should finally  reinstall my  SGI Indy  to try  to use  it for  this
purpose.  But for  now I'm  only able  to see  a part  of image  on the
UKNC...